跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 1

步骤 1
Now the  back cover is off and the battery is removed, so the hard drive is clearly visible.
  • Now the back cover is off and the battery is removed, so the hard drive is clearly visible.

  • There are four 4.2 mm screws securing the hard drive to the logic board.

  • Remove all four screws using a Phillips #00 screwdriver.

  • Don't lose any of the screws! If necessary, use a magnetized screw driver.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可