跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Follow the attached ribbon cable to the circuit board of the device. On the side of the ribbon cable, use a small plastic spudger to pop open this plastic lock and gently pull in the direction of the cable to remove.
  • Follow the attached ribbon cable to the circuit board of the device.

  • On the side of the ribbon cable, use a small plastic spudger to pop open this plastic lock and gently pull in the direction of the cable to remove.

  • Gently lift up on the battery connector just below the earlier removed ribbon cable to remove.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可