修复你的物品

维修的权力

商店

返回指南
英语
中文
上一步 下一步

正翻译步骤 11

步骤 11
The speaker is fastened to the case with small clips held down by two nuts.

  • The speaker is fastened to the case with small clips held down by two nuts.

  • Use a 5mm nutdriver to loosen the nuts.

  • You may find the space a bit tight to fit a nutdriver in close to the case edge. If so, you can try using needlenose pliers instead to loosen the nuts.

  • Once the nuts are loosened, you can separate the speaker from the case.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。