跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
The window control panel may or may not have a small gap similar to the door bezel, this gap is merely for convenience. Should there be none: place the screwdriver on any edge and pry it underneath and then up and off. Remove the window control panel just beneath the handle, it should snap into place just like the door bezel. Disconnect the wired connectors. The connectors have a small pin that must be pushed in before they can detach, either use your fingers or a small Flathead screwdriver as shown in the pictures.
  • The window control panel may or may not have a small gap similar to the door bezel, this gap is merely for convenience. Should there be none: place the screwdriver on any edge and pry it underneath and then up and off.

  • Remove the window control panel just beneath the handle, it should snap into place just like the door bezel. Disconnect the wired connectors.

  • The connectors have a small pin that must be pushed in before they can detach, either use your fingers or a small Flathead screwdriver as shown in the pictures.

  • Similar to the door bezel and trim panels, use a flathead screwdriver and gently pry the panel off.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可