注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的22本指南。
正翻译步骤 4
步骤 4


-
Insert the flat end of a spudger between the front bezel and the plastic strip attached to the rear bezel near the screw holes at the bottom corners of the display.
-
Rotate your spudger toward the rear bezel to separate it from the front bezel.
-
If necessary, enlarge the gap between the lower edge of the rear bezel and the clutch cover until the two components are completely separated.