跳转到主内容

MacBook Pro 15" Touch Bar 2018 下部ケースの交換

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
日语

正翻译步骤 1

步骤 1
MacBook Pro 15" Touch Bar 2018 Lower Case Replacement: 步骤 0 中的图像 1,2 MacBook Pro 15" Touch Bar 2018 Lower Case Replacement: 步骤 0 中的图像 2,2
  • Completely power off and unplug your MacBook Pro before you start. Close the display and flip the entire laptop upside-down.

  • Use a P5 Pentalobe driver to remove six screws securing the lower case, of the following lengths:

  • Four 4.7 mm screws

  • Two 6.6 mm screws

  • Note how the screws come out at a slight angle—you must reinstall them the same way.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

MacBook Proの電源を完全に切って、接続を外します。ディスプレイを閉じて、ラップトップを裏返します。

P5ペンタローブドライバーを使って、次の長さのネジを、下部ケースから外します。

4.7 mmネジー4本

6.6 mmネジー2本

これらのネジを外す際に、ネジの方向を書き留めておきましょう。ある決められた角度でインストールしなければならないネジがあります。

この作業では、各ネジの装着位置を書き留めておきましょう。デバイスのダメージを防ぐため、組み立ての際は、本来の位置に取り付けてください。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利