跳转到主内容

Sostituzione cover inferiore MacBook Pro 15" Touch Bar 2018

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
意大利语

正翻译步骤 1

步骤 1
MacBook Pro 15" Touch Bar 2018 Lower Case Replacement: 步骤 0 中的图像 1,2 MacBook Pro 15" Touch Bar 2018 Lower Case Replacement: 步骤 0 中的图像 2,2
  • Completely power off and unplug your MacBook Pro before you start. Close the display and flip the entire laptop upside-down.

  • Use a P5 Pentalobe driver to remove six screws securing the lower case, of the following lengths:

  • Four 4.7 mm screws

  • Two 6.6 mm screws

  • Note how the screws come out at a slight angle—you must reinstall them the same way.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Prima di iniziare, spegni completamente e stacca dall'alimentazione il tuo MacBook Pro. Richiudi il display e ribalta il laptop mettendolo a faccia in giù.

Usa un cacciavite pentalobe P5 per rimuovere le sei viti che fissano la cover inferiore, delle seguenti lunghezze:

Quattro viti da 4,7 mm

Due viti da 6,6 mm

Fai caso al fatto che le viti escono leggermente angolate: dovrai poi rimontarle nello stesso modo.

Nel corso dell'intera procedura, tieni traccia di ogni vite e accertati che ognuna venga rimessa esattamente dove è stata estratta per evitare danni al dispositivo.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利