跳转到主内容
英语
中文

正翻译步骤 7

步骤 7
Attach the back cover again and tighten the screws. I'd suggest to tighten them diagonally which means start with the one on the top left and on the bottom right, then the one on the top right and bottom left and so on.
  • Attach the back cover again and tighten the screws. I'd suggest to tighten them diagonally which means start with the one on the top left and on the bottom right, then the one on the top right and bottom left and so on.

  • If everything went fine, your BIOS/EFI should recognize your new SSD now. Congratulations, you fixed it! :)

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可