跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 1

步骤 1
Flip the device such that the labels are on top. Use a Phillips #1 screwdriver to remove the four 8mm screws near the back.
  • Flip the device such that the labels are on top.

  • Use a Phillips #1 screwdriver to remove the four 8mm screws near the back.

  • Use the same screwdriver to remove the four 5mm screws in the front.

  • Use the same screwdriver to remove the single 9mm screw in the center.

  • Make sure that the device is powered down and unplugged.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可