跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 7

步骤 7
Once you have sliced around the phone, twist an opening pick in one of the edges to help separate the back cover from the frame. Lift the back cover slowly. Use opening picks to slice any remaining adhesive. Remove the back cover.
  • Once you have sliced around the phone, twist an opening pick in one of the edges to help separate the back cover from the frame.

  • Lift the back cover slowly. Use opening picks to slice any remaining adhesive.

  • Remove the back cover.

  • Before reinstalling the back cover, be sure to remove all adhesive residue from the frame.

  • Use tweezers to pull adhesive chunks, an opening tool to scrape bits off, and high concentration (over 90%) isopropyl alcohol to clean residue.

  • If you are re-using the back cover, be sure to also remove all adhesive residue from the back cover.

  • During reassembly, this is a good point to power on your phone and test all functions before you seal the back cover in place. Be sure to power your phone back down completely before you continue working.

在手机上划开之后,扭动其中一个边缘的三角撬片,以帮助将后盖与框架分开。

慢慢抬起后盖。使用三角撬片切割任何剩余的粘合剂。

取下后盖。

在重新安装后盖之前,务必清除框架上的所有粘合剂残留物。

使用镊子拉出粘合剂块,打开工具刮掉碎片,然后用高浓度(超过90%)的异丙醇清洗残留物。

如果你要重新使用后盖,请务必清除后盖上的所有粘合剂残留物。

在重新组装过程中,在将后盖密封到位之前,这是打开手机电源并测试所有功能的号时机。在继续工作之前,请务必将手机完全重新打开。

在开源创作共享许可协议下,你的投稿已被许可