跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 5

步骤 5
Apply a heated iOpener to the bottom edge of the phone for two minutes. Insert an opening pick into the right edge near the bottom right corner. Carefully slide the pick around the corner. Continue cutting along the bottom edge and around the bottom left corner.
  • Apply a heated iOpener to the bottom edge of the phone for two minutes.

  • Insert an opening pick into the right edge near the bottom right corner.

  • Carefully slide the pick around the corner. Continue cutting along the bottom edge and around the bottom left corner.

  • If the cutting feels difficult, re-apply heat to the edge before continuing.

  • Leave an opening pick in the seam to prevent the adhesive from re-sealing.

将加热的 iOpener 应用到手机的底部边缘两分钟。

将三角撬片插入右下角附近的右边缘。

小心翼翼地将三角撬片放在拐角处。沿着底边和左下角继续切割。

如果感觉切割困难,请在继续之前重新加热边缘。

在接缝处留下三角撬片,以防止粘合剂重新密封。

在开源创作共享许可协议下,你的投稿已被许可