跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 2

步骤 2
Rest the heated right edge of the phone on something that is about  0.5 inches (13 mm) thick. This angles the phone for the opening tool. Brace the left edge of the phone with your fingers so that the phone won't slide. Pull on the suction cup with firm pressure. Press the edge of an opening tool into the seam between the back cover and the frame.
  • Rest the heated right edge of the phone on something that is about 0.5 inches (13 mm) thick. This angles the phone for the opening tool.

  • Brace the left edge of the phone with your fingers so that the phone won't slide. Pull on the suction cup with firm pressure.

  • Press the edge of an opening tool into the seam between the back cover and the frame.

  • Slide the opening tool back and forth along the seam a few times.

如果你最开始很难撬开,请执行此步骤。

加热 iOpener 并将其放在手机的右边缘两分钟。

将手机的加热右边缘放在约0.5英寸(13毫米)厚的物体上。这使手机成为打开工具的角度。

用手指支撑手机的左边缘,这样手机就不会滑动。用坚固的压力拉动吸盘。

将打开工具的边缘按入后盖和框架之间的接缝中。

沿着接缝来回几次滑动撬棒工具。

[* icon_note] Follow this step if you are having a hard time creating an initial gap.
[* black] Heat an iOpener and apply it to the right edge of the phone for two minutes.
[* black] Rest the heated right edge of the phone on something that is about 0.5 inches (13 mm) thick. This angles the phone for the opening tool.
[* black] Brace the left edge of the phone with your fingers so that the phone won't slide. Pull on the suction cup with firm pressure.
[* black] Press the edge of an opening tool into the seam between the back cover and the frame.
[* black] Slide the opening tool back and forth along the seam a few times.

在开源创作共享许可协议下,你的投稿已被许可