注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南。
正翻译步骤 1
步骤 1


Heat the back cover
-
Unplug and power off your phone before you begin.
-
Heat an iOpener and apply it to the back cover's right edge for two minutes.
-
As you wait, take a look at the image of the removed back cover and take note of where the adhesive is located.
[title] Heat the back cover |
[* black] Unplug and power off your phone before you begin. |
[* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the '''back cover's right edge''' for two minutes. |
[* icon_note] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage. |
[* red] As you wait, take a look at the image of the removed back cover and take note of where the adhesive is located. |