跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的42本指南

英语
中文

正翻译步骤 7

步骤 7
The LCD is glued to the metal LCD shield plate behind it along the top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to shift the LCD a couple of millimeters left and right several times. Insert a guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.
  • The LCD is glued to the metal LCD shield plate behind it along the top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to shift the LCD a couple of millimeters left and right several times.

  • Insert a guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.

  • Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case.

LCD金属屏蔽版与LCD使用胶水在其顶部左侧和右侧的边角相粘连。 为了安全分离这些粘合剂,你需要使用吉他拨片来移动几毫米。

在LCD与后壳靠近左上角的位置插入吉他拨片

小心向外弯曲拨片,不需要撬开过大的缝隙。

在开源创作共享许可协议下,你的投稿已被许可