注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的35指南。
正翻译步骤 1
步骤 1
-
To minimize stress on the socket, try prying under the short edge of the connector, rather than the long edge which is shown in these images.
-
Gently pry the digitizer connector up from its socket on the logic board.
| - | [* black] Use a plastic opening tool to gently pry the digitizer connector up from its socket on the logic board. |
|---|---|
| - | [* icon_caution] Be very careful to pry evenly on the connector, and not on the socket at all. The socket and connector are very delicate and if you damage either, your digitizer won't work. |
| + | [* icon_caution] Be very careful to pry evenly on the digitizer connector, and not on the socket at all. The socket and connector are very delicate and if you damage either, your digitizer won't work. |
| + | [* black] To minimize stress on the socket, try prying under the short edge of the connector, rather than the long edge which is shown in these images. |
| + | [* black] Gently pry the digitizer connector up from its socket on the logic board. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。