菜单

你的设置

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的39本指南。

返回指南
英语
中文
下一步

正翻译步骤 1

步骤 1
Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.

  • Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.

  • Be sure to not substitute these three screws with any other screws, specifically the screws securing the LCD shield plate to the rear case of the iPad. Any slightly longer screws may strip the screw holes and result in irreparable damage to the logic board.

移除固定连接器支架的三颗 1.3 mm Phillips #00 螺丝

确保这三颗螺丝没有与其他螺丝弄混， 任何稍长的螺丝可能会损坏螺丝孔，导致逻辑板的不可修复的损坏。

在开源创作共享许可协议下，你的投稿已被许可。