Skip to main content
英语
中文

正翻译步骤 8

Step 8
After you seal the bulb, you will then place the entire casing back into the bumper ensuring that the hidden clip mentioned earlier is attached. Then, re attach the wires, you  should hear a clicking sound when wire is properly placed  in socket. After you seal the bulb, you will then place the entire casing back into the bumper ensuring that the hidden clip mentioned earlier is attached. Then, re attach the wires, you  should hear a clicking sound when wire is properly placed  in socket.
  • After you seal the bulb, you will then place the entire casing back into the bumper ensuring that the hidden clip mentioned earlier is attached. Then, re attach the wires, you should hear a clicking sound when wire is properly placed in socket.

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可