跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的13指南

英语
中文

正翻译步骤 9

Step 9
Carefully lay the display down on top of the rear case as shown, making sure not to crease or tear the display ribbon cable. Remove the two 4.0 mm T5 Torx screws securing the display cable bracket.
  • Carefully lay the display down on top of the rear case as shown, making sure not to crease or tear the display ribbon cable.

  • Remove the two 4.0 mm T5 Torx screws securing the display cable bracket.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可