菜单

你的设置

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的42指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 11

步骤 11
Starting at the top right of the device, slide the spudger in between the LCD frame and metal backing plate, which will separate the adhesive as you push. The goal is to separate the adhesive, not to pry the LCD up, so keep the pointed tip of the spudger as low as possible to prevent bending the LCD. If inserting the spudger causes the corner of the LCD to bend up, repeat the steps with the guitar pick to further loosen the adhesive.

  • Starting at the top right of the device, slide the spudger in between the LCD frame and metal backing plate, which will separate the adhesive as you push.

  • The goal is to separate the adhesive, not to pry the LCD up, so keep the pointed tip of the spudger as low as possible to prevent bending the LCD.

  • If inserting the spudger causes the corner of the LCD to bend up, repeat the steps with the guitar pick to further loosen the adhesive.

从设备的右上角开始，将撬棒滑入LCD框和金属背板之间，当您推动撬棒时也会分离两者之间的粘合剂。

我们的目标是分离粘合剂，而不是撬起LCD。 所以尽量小角度撬动，防止损伤LCD。

如果在LCD边角处深入撬棒会使得LCD弯曲，使用吉他拨片来重复上述动作来进一步分离粘合剂。

在开源创作共享许可协议下，你的投稿已被许可。