菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的42指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 10

步骤 10
In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath. Insert the flat end of a spudger between the LCD frame and the metal backing plate. Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. Prying up on the plate will damage it, because it is screwed down to the rear case beneath the LCD.

  • In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath.

  • Insert the flat end of a spudger between the LCD frame and the metal backing plate.

  • Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. Prying up on the plate will damage it, because it is screwed down to the rear case beneath the LCD.

在接下来几步中，你将使用撬棒在LCD与金属背板之间滑动来将LCD从下方的粘合剂中分离出来。

将撬棒扁平的一端插入LCD框与金属背板之间。

确保撬棒位于LCD框与背板之间，而不是在背板的下方。 撬起背板将会损坏部件，因为在LCD下方螺丝将背板与后壳固定。

在开源创作共享许可协议下，你的投稿已被许可。