跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 6

步骤 6
After the actuator is removed from the door the new one must be unboxed and prepped for install Use WD-40 to spray down the eyelet (the rubber ring) as shown to make the pressing of the rod back into the loop easier, it is a very tight fit Use WD-40 to spray down the eyelet (the rubber ring) as shown to make the pressing of the rod back into the loop easier, it is a very tight fit
  • After the actuator is removed from the door the new one must be unboxed and prepped for install

  • Use WD-40 to spray down the eyelet (the rubber ring) as shown to make the pressing of the rod back into the loop easier, it is a very tight fit

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可