跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 1

步骤 1
Peel up and remove the insulating sticker covering the battery board, on the edge of the logic board nearest the battery.
  • Peel up and remove the insulating sticker covering the battery board, on the edge of the logic board nearest the battery.

  • If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.

  • If the cover doesn't seat securely during reassembly, try rotating it 180 degrees. It must be oriented correctly in order for the adhesive pads underneath to contact the board screws.

剥离并取下最靠近电池的主板边缘的大矩形电池板盖。

如果盖子不易剥落,请使用 iOpener,吹风机或热风枪轻轻加热以软化下面的粘合剂,然后再试一次。

如果在重新组装时盖子没有牢固就位,请尝试将其旋转180度。必须正确定位,以使下面的粘合垫与板上螺丝接触。

在开源创作共享许可协议下,你的投稿已被许可