跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南

英语
中文

正翻译步骤 5

步骤 5
Slowly flip the cover over and set it down on top of the rest of the device. Disconnect the fingerprint flex cable using the flat end of a spudger.
  • Slowly flip the cover over and set it down on top of the rest of the device.

  • Disconnect the fingerprint flex cable using the flat end of a spudger.

  • Remove the back cover.

  • To reconnect the fingerprint sensor cable during reassembly, angle the back cover until the flex cable lines up over its socket. Use the flat end of a spudger to snap the cable in place by gently pressing straight down.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可