跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南

英语
中文

正翻译步骤 3

步骤 3
Insert the Jimmy tool under the edge of the back cover. Because of the texture of the back cover, a suction handle does not provide any grip to help lift the back cover. Once the Jimmy tool is under the edge of the cover, insert an opening pick into the seam to prevent the seam from closing if the Jimmy tool slips or is accidentally removed.
  • Insert the Jimmy tool under the edge of the back cover.

  • Because of the texture of the back cover, a suction handle does not provide any grip to help lift the back cover.

  • Once the Jimmy tool is under the edge of the cover, insert an opening pick into the seam to prevent the seam from closing if the Jimmy tool slips or is accidentally removed.

  • Cut slowly around the top section of the device and be careful to avoid damaging the cables for the fingerprint sensor and camera. Avoid prying too far into the top of the device to protect the fingerprint sensor.

  • Slide the Jimmy tool down the sides of the device, separating the adhesive.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可