跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的16本指南

英语
中文

正翻译步骤 3

步骤 3
There are three notches on either side of the battery. In the next few steps, you will be using these notches to gradually pry the battery up from the rear case. The battery is secured with large amounts of adhesive, so you'll need to go slowly and carefully to avoid puncturing or creasing the battery.
  • There are three notches on either side of the battery. In the next few steps, you will be using these notches to gradually pry the battery up from the rear case.

  • The battery is secured with large amounts of adhesive, so you'll need to go slowly and carefully to avoid puncturing or creasing the battery.

  • Insert a plastic opening tool into the top right notch and gently pry up on the battery.

  • Do not attempt to pry up the entire battery at this point; you just want to start to loosen the adhesive at each of the prying points, in turn.

电池两侧有三个凹口。 在接下来的几个步骤中,您将使用这些凹槽逐渐从后盖撬起电池。

电池用大量的粘合剂固定,所以您需要慢慢地小心,以避免刺伤或弯折电池。

将塑料打开工具插入右上角的凹槽,轻轻地撬起电池。

此时不要试图撬起整个电池; 您只需要依次开始在每个撬动点松开粘合剂。

在开源创作共享许可协议下,你的投稿已被许可