跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Use a pair of tweezers and grasp the black plastic portion of the headphone jack cable.
  • Use a pair of tweezers and grasp the black plastic portion of the headphone jack cable.

  • Slowly pull out the cable. If it's hard to pull, wiggle it slightly side-to-side while pulling it.

  • Plugging the new headphone jack into place will require some force. Make sure not to break the connector while performing this procedure. Grasp the black plastic portion of the cable and wiggle it into the logic board connector.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可