跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的17本指南

英语
中文

正翻译步骤 2

步骤 2
Remove the following screws securing the LCD plate to the rear case:
  • Remove the following screws securing the LCD plate to the rear case:

  • Two 1.2 mm #000 Phillips screws

  • Nine 1.6 mm #000 Phillips screws

  • One 2.3 mm #000 Phillips screw

移除下列将LCD板与后壳固定的螺丝。

2颗1.2mm #00 十字螺丝

9颗 1.6mm #00 十字螺丝

1颗 2.3 mm #00 十字螺丝

[* black] Remove the following screws securing the LCD plate to the rear case:
[* red] Two 1.2 mm #00#000 Phillips screws
[* orange] Nine 1.6 mm #00#000 Phillips screws
[* yellow] One 2.3 mm #00#000 Phillips screw
[* red] Two 1.2 mm #00#000 Phillips screws
[* orange] Nine 1.6 mm #00#000 Phillips screws
[* yellow] One 2.3 mm #00#000 Phillips screw

在开源创作共享许可协议下,你的投稿已被许可