Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

Step 1
Use the edge of a plastic opening tool to gently pry the wi-fi antenna connector off the back of the logic board.
  • Use the edge of a plastic opening tool to gently pry the wi-fi antenna connector off the back of the logic board.

  • This cable is very delicate; be careful not to stress the point where it connects to the antenna.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可