跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的21指南

英语
意大利语

正翻译步骤 14

步骤 14
Use a spudger to disconnect the two visible display flex connectors by gently prying them straight up from their sockets. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
  • Use a spudger to disconnect the two visible display flex connectors by gently prying them straight up from their sockets.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Usa uno spudger per scollegare i due connettori visibili facendo leva delicatamente e sollevandoli dalle loro prese.

Per ricollegare i connettori a pressione come questo, allinea attentamente e premi su un lato finché non scatta al suo posto, quindi ripeti per l'altro lato. Non premere nel centro. Se il connettore non è allineato correttamente, i contatti si possono piegare, causando danni permanenti.

在开源创作共享许可协议下,你的投稿已被许可