跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的21指南

英语
意大利语

正翻译步骤 13

步骤 13
Slowly lift the display from its top edge, being careful not to strain the attached ribbon cables. Remove the two 1.3 mm Phillips screws securing the display connector cover bracket. You may need to angle the driver slightly in order to avoid straining the ribbon cables.
  • Slowly lift the display from its top edge, being careful not to strain the attached ribbon cables.

  • Remove the two 1.3 mm Phillips screws securing the display connector cover bracket.

  • You may need to angle the driver slightly in order to avoid straining the ribbon cables.

  • Remove the display connector cover bracket.

Solleva lentamente il bordo superiore dello schermo, stando attendo a non strappare i cavi a nastro ancora connessi.

Svita le due viti a croce Phillips da 1,3 mm che tengono ferma la copertura dei connettori dello schermo.

Potresti dover angolare leggermente il cacciavite per non forzare i cavi.

Rimuovi la staffa di copertura dei connettori dello schermo.

在开源创作共享许可协议下,你的投稿已被许可