跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的21指南

英语
意大利语

正翻译步骤 10

步骤 10
Remove the 1.9 mm Phillips screw that secures the battery power connector. Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.
  • Remove the 1.9 mm Phillips screw that secures the battery power connector.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Svita la vite a croce Phillips da 1,9 mm che tiene fermo il connettore della batteria.

Stai estremamente attento quando infili il blocco per batterie. Infilalo delicatamente e il più dritto possibile parallelamente alla scheda madre. Non ruotare o muovere di lato il blocco.

Per scollegare la batteria, infila un dente del blocco per la batteria o la punta di un plettro sotto il connettore della batteria per assicurarti che non faccia più contatto.

[* red] Remove the 1.9 mm Phillips screw that secures the battery power connector.
-[* icon_caution] Take extreme care when you insert the battery blocker. Insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
- [* black] To disconnect the battery, slide one prong of a Battery Blocker or the tip of an opening pick under the battery power connector to ensure the power circuit is interrupted.
+[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your device.

在开源创作共享许可协议下,你的投稿已被许可