跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的21指南

英语
意大利语

正翻译步骤 9

步骤 9
Lift the display assembly from its top edge and carefully slide it up (towards the front-facing camera and headphone jack), until the screw that secures the battery power connector is revealed at the bottom. Don't lift the display more than 70° or you may damage the attached ribbon cables. Don't lift the display more than 70° or you may damage the attached ribbon cables.
  • Lift the display assembly from its top edge and carefully slide it up (towards the front-facing camera and headphone jack), until the screw that secures the battery power connector is revealed at the bottom.

  • Don't lift the display more than 70° or you may damage the attached ribbon cables.

Solleva lo schermo dal suo bordo superiore e fallo scorrere verso l'alto dell'iPad (verso la fotocamera frontale e la presa jack) fino a rivelare la vite in basso che tiene fermo il connettore della batteria.

Non piegare lo schermo più di 70° o potresti danneggiare i cavi a nastro che lo collegano.

在开源创作共享许可协议下,你的投稿已被许可