跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的21指南

英语
中文

正翻译步骤 2

步骤 2
If your iPad's screen is badly cracked, wear skin and eye protection. Cover the screen with a smooth layer of clear packing tape to contain glass shards and help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and fold it into a handle.
Create an opening gap
  • If your iPad's screen is badly cracked, wear skin and eye protection. Cover the screen with a smooth layer of clear packing tape to contain glass shards and help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and fold it into a handle.

  • Place a suction cup next to the iPad's home button and press down to create a seal.

  • To get the most leverage, place the suction cup as close to the edge as possible without going past the edge of the display.

  • Firmly pull up on the suction cup to to create a small gap between the front panel and the rear case.

  • Don't pull too hard, or you may shatter the glass. If necessary, apply more heat to further soften the adhesive.

  • Once you've opened a sufficient gap, insert an opening pick into the gap.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可