跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Start by taking the screws from around the frame off.
  • Start by taking the screws from around the frame off.

  • Then remove the screws from this PCB

  • If you are replacing screen components, skip to step 7

  • Remove the little foam pads from the two connectors on the PCB These are for the digitizer

  • Flip up the releases on the plugs to pull out the ribbon cable. (I will show some more detailed pictures of the same process on other connectors.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可