跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
中文

正翻译步骤 3

步骤 3
Flip the Lightning connector/logic board assembly back over to expose the top of the logic board. The display cable is lightly adhered to the top of the logic board. Use the flat end of a spudger to peel the display cable up from the logic board.
  • Flip the Lightning connector/logic board assembly back over to expose the top of the logic board.

  • The display cable is lightly adhered to the top of the logic board.

  • Use the flat end of a spudger to peel the display cable up from the logic board.

将Lightning连接器/逻辑板组件翻转来露出逻辑板的顶部。

显示线缆轻轻地粘在逻辑板的顶部。

使用撬棒扁平一端来将显示线缆从逻辑板上剥下来。

在开源创作共享许可协议下,你的投稿已被许可