跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的16指南

英语
中文

正翻译步骤 7

Step 7
Once all of the adhesive is loosened, lift the battery up from the bottom and swing it out over the left side of the rear case. Be sure not to yank it out, as it is soldered to the logic board. Flip the battery over to straighten its cable and set it down.
  • Once all of the adhesive is loosened, lift the battery up from the bottom and swing it out over the left side of the rear case.

  • Be sure not to yank it out, as it is soldered to the logic board.

  • Flip the battery over to straighten its cable and set it down.

一旦所有的粘合剂松动,将电池从底部提起并将其从背面的左侧区取出。

确保不要把它弄出来,因为它被焊接到逻辑板上。

将电池翻转以拉直电缆并将其放下。

在开源创作共享许可协议下,你的投稿已被许可