Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的16指南

英语
中文

正翻译步骤 1

Step 1
Remove three 1.6 mm #000 Phillips screws securing the logic board to the rear case.
  • Remove three 1.6 mm #000 Phillips screws securing the logic board to the rear case.

移除三颗将后壳与逻辑板相固定的 1.6 mm #00 十字螺丝

[* red] Remove three 1.6 mm #00#000 Phillips screws securing the logic board to the rear case.
[* red] Remove three 1.6 mm #00#000 Phillips screws securing the logic board to the rear case.

在开源创作共享许可协议下,你的投稿已被许可