跳转到主内容
英语
西班牙语

正翻译步骤 13

步骤 13
The last parts to come out of the back cover are the service port and the loudspeaker, held fast by two Phillips screws, with a rubber gasket for ingress protection. From the midframe, we extract an ordinary vibration motor and a hall sensor array, which we set aside to investigate later with the rotating bezel. From the midframe, we extract an ordinary vibration motor and a hall sensor array, which we set aside to investigate later with the rotating bezel.
  • The last parts to come out of the back cover are the service port and the loudspeaker, held fast by two Phillips screws, with a rubber gasket for ingress protection.

  • From the midframe, we extract an ordinary vibration motor and a hall sensor array, which we set aside to investigate later with the rotating bezel.

Las últimas piezas que salen de la tapa trasera son el puerto de servicio y el altavoz, sujetados por dos tornillos Phillips, con una junta de goma para la protección de entrada.

Del marco central, extraemos un motor de vibración ordinario y un conjunto de sensores de sala, que dejamos a un lado para investigar más tarde con el bisel giratorio.

在开源创作共享许可协议下,你的投稿已被许可