跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
To remove each fitting, secure the outer shell in a vise or such.   Use an open-ended wrench or  flare wrench (better), to unscrew the mandrel tube from the ID of the hose.  It is a normal right-hand thread.  Once out, unscrew the hose from inside the shell.  That is a left-hand thread, so turn as if you were tightening a bolt to unscrew.
  • To remove each fitting, secure the outer shell in a vise or such. Use an open-ended wrench or flare wrench (better), to unscrew the mandrel tube from the ID of the hose. It is a normal right-hand thread. Once out, unscrew the hose from inside the shell. That is a left-hand thread, so turn as if you were tightening a bolt to unscrew.

  • Factory instructions for the fitting may be document "Gates Field Attachable Coupling Installation" (search), but note the shell there screws onto the hose OD with right-hand thread.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可