跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Gently slide a plastic card or other thin pry tool under the adhered component. It may help to gently wiggle or twist the card as you go. If you're separating a battery, be careful not to deform or puncture it. If you're struggling, apply a few more drops of adhesive remover and wait about a minute before trying again.
  • Gently slide a plastic card or other thin pry tool under the adhered component.

  • It may help to gently wiggle or twist the card as you go. If you're separating a battery, be careful not to deform or puncture it.

  • If you're struggling, apply a few more drops of adhesive remover and wait about a minute before trying again.

  • If your device has an especially tight fit and you have trouble inserting a tool, try working a piece of floss or wire underneath the component, and pull it side-to-side in a sawing motion to separate the adhesive.

  • Lift and separate your newly-unglued component.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可