跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Apply a few drops of adhesive remover evenly along the elevated edge of your glued-down component. A little bit goes a long way, so start with a very small amount. You can always add more later if needed. Applying the solvent in small amounts helps prevent unwanted leaks.
  • Apply a few drops of adhesive remover evenly along the elevated edge of your glued-down component.

  • A little bit goes a long way, so start with a very small amount. You can always add more later if needed. Applying the solvent in small amounts helps prevent unwanted leaks.

  • Wait 2-3 minutes for the liquid adhesive remover to penetrate and soften the adhesive before you proceed to the next step.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可