跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 4

步骤 4
Repeat the above steps to remove the remaining three adhesive strips. Be sure to hold onto the battery as you remove the final strip, or it may fling out of the iPhone unexpectedly.
  • Repeat the above steps to remove the remaining three adhesive strips.

  • Be sure to hold onto the battery as you remove the final strip, or it may fling out of the iPhone unexpectedly.

  • If you removed all of the adhesive strips successfully, skip the next step.

  • If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

  • Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

  • Be careful not to damage the ribbon cables or the wireless charging coil directly underneath the battery.

  • For an alternative method to unstick the battery, continue with the next step below.

重复上述步骤以去除剩余的三个拉条。

在取下最后一个小拉条时务必抓住电池,否则可能会意外地从iPhone中掉出来。

如果成功移除了所有拉条,请跳过下一步。

如果任何胶条在电池下面断裂而无法取出,请继续下面的下一步。

[* black] Repeat the above steps to remove the remaining three adhesive strips.
[* icon_caution] Be sure to hold onto the battery as you remove the final strip, or it may fling out of the iPhone unexpectedly.
[* black] If you removed all of the adhesive strips successfully, skip the next step.
[* icon_caution] If any oficon_note] If the adhesive strips brokebreaks off underneath the battery and could notcan't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).
[* black] Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.
[* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
[* icon_caution] Be careful not to damage the ribbon cables or the wireless charging coil directly underneath the battery.
[* icon_note] For an alternative method to unstick the battery,
'''continue with the next step below'''.
[* icon_caution] If any oficon_note] If the adhesive strips brokebreaks off underneath the battery and could notcan't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).
[* black] Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.
[* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
[* icon_caution] Be careful not to damage the ribbon cables or the wireless charging coil directly underneath the battery.
[* icon_note] For an alternative method to unstick the battery,
'''continue with the next step below'''.

在开源创作共享许可协议下,你的投稿已被许可