跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南

英语
中文

正翻译步骤 1

步骤 1
Remove three 1.2 mm Y000 screws securing the battery connector cover bracket. Remove the bracket.
Unscrew the battery connector cover
  • Remove three 1.2 mm Y000 screws securing the battery connector cover bracket.

  • Remove the bracket.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  • During reassembly, this is a good point to power on your iPhone and test all functions before you seal the display in place. Be sure to power your iPhone back down completely before you continue working.

拧下电池排线挡板的三颗1.2mm Y000螺丝。

取下挡板。

整个维修过程,始终都不要忘记螺丝的位置 ,也不要将它搞丢。当你将手机组装回去时,一定要确保所有螺丝都被安装到位,否则手机将极有可能损坏。

在重新组装过程中,打开iPhone并测试所有功能是个好主意,然后再将显示屏密封就位。 在继续工作之前,请确保完全关闭iPhone的电源。

在开源创作共享许可协议下,你的投稿已被许可