跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的10本指南

英语
中文

正翻译步骤 6

步骤 6
Align the new foot inside the cavity. Make sure the alignment nub on the foot is lined up with the small hole near the perimeter of the pad. Lay the foot down while keeping it properly aligned.
  • Align the new foot inside the cavity.

  • Make sure the alignment nub on the foot is lined up with the small hole near the perimeter of the pad.

  • Lay the foot down while keeping it properly aligned.

  • Check for proper alignment from the inside of the case. The alignment nub should be slightly visible through the alignment hole.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可