跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南

英语
中文

正翻译步骤 2

步骤 2
In the following steps, you'll be cutting through the adhesive securing the back cover.
  • In the following steps, you'll be cutting through the adhesive securing the back cover.

  • The adhesive in the inside of the back cover is laid out as seen in the image.

  • You'll be slicing through the adhesive in the areas shown:

  • Thick portions of adhesive

  • Thin areas of adhesive

  • Avoid prying or slicing in this area, to protect the fingerprint sensor flex cable.

在以下步骤中,你将切割固定后盖的粘合剂。

如图所示,后盖内侧的粘合剂是这样布置的。

你将在所示区域中切割粘合剂:

粘合剂厚的区域

粘合剂薄的区域

避免在此区域撬或切片,以保护指纹传感器柔性电缆。

在开源创作共享许可协议下,你的投稿已被许可