跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南

英语
中文

正翻译步骤 3

步骤 3
If the phone's rear glass is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed. Press a suction cup onto the back cover. Lift the back cover's bottom edge with your suction cup, opening a slight gap between the back cover and the frame.
  • If the phone's rear glass is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Press a suction cup onto the back cover.

  • Lift the back cover's bottom edge with your suction cup, opening a slight gap between the back cover and the frame.

  • This may require a significant amount of force, but you only need to open a very slight gap with the suction cup to insert your tool. If you have trouble, apply more heat to further soften the adhesive, and try again. The adhesive cools very fast, so you may need to heat it repeatedly.

  • Insert an opening pick in the gap you created and slide it to the bottom right corner.

  • Insert a second opening pick and slide it to the bottom left corner.

  • Insert a third opening pick to prevent the adhesive from resealing during the rest of the removal procedure.

如果手机的后玻璃破裂,吸盘可能不会粘住。尝试用强力胶带将其提起,或将吸盘加到适当位置并使其固化,以便继续进行。

将吸盘按到后盖上。

用吸盘提起后盖的底边,打开后盖和框架之间的微小间隙。

这可能需要很大的力,但你只需要用吸盘打开一个非常小的间隙即可插入工具。如果遇到问题,请加热以进一步软化粘合剂,然后再试一次。粘合剂冷却速度非常快,因此你可能需要反复加热。

在你打开的间隙中插入一个三角撬片,然后将其滑动到右下角。

插入第二个三角撬片并将其滑动到左下角。

插入第三个三角撬片,以防止粘合剂在其余的拆卸过程中重新密封。

在开源创作共享许可协议下,你的投稿已被许可