英语
中文

正翻译步骤 1

步骤 1
Peel the hold switch cable from along the edge of the battery and lay it aside. The hold switch cable is not attached to the battery. The battery is held on to the logic board by a strong adhesive. Force may be required to remove the battery from the logic board.
  • Peel the hold switch cable from along the edge of the battery and lay it aside. The hold switch cable is not attached to the battery.

  • The battery is held on to the logic board by a strong adhesive. Force may be required to remove the battery from the logic board.

  • Pry the battery off the adhesive securing it to the metal tray on the logic board.

沿着电池边缘揭开连接着开关的排线。排线并没有与电池相连。

电池是被强力粘合剂固定在主板上的,你可能需要用力将其与主板分离。

将电池从主板上撬下来。

在开源创作共享许可协议下,你的投稿已被许可