注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 8

步骤 8
Pull the logic board assembly out of the outer case, minding the hold switch and click wheel cables that may get caught.
  • Pull the logic board assembly out of the outer case, minding the hold switch and click wheel cables that may get caught.

  • When reassembling, ensure the click wheel cable is toward the front of the Nano and not in the grooves on the side. If it is in the groove you will probably cut it while sliding the logic board into place.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可