跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 4

步骤 4
Carefully slide the flat edge of a spudger underneath the flex cable below the microphone. Twist gently to separate the microphone, while being careful not to strain or damage the flex cable. If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel. If the microphone remains difficult to separate, apply more heat.
Pry up the microphone
  • Carefully slide the flat edge of a spudger underneath the flex cable below the microphone.

  • Twist gently to separate the microphone, while being careful not to strain or damage the flex cable.

  • If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel. If the microphone remains difficult to separate, apply more heat.

使用开口撬片小心地在麦克风下方的柔性电缆下边缘滑动。

轻轻扭动以分离麦克风,同时注意不要拉紧或损坏柔性电缆。

如果需要,使用撬棒的点完成麦克风与前面板凹槽的分离。如果麦克风仍然难以分离,请加热。

在开源创作共享许可协议下,你的投稿已被许可