修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 5

步骤 5
Working left to right, slide an opening pick beneath the flex cable and underneath the proximity sensor + flood illuminator module. Gently wiggle and lift to separate the module from its notch in the front panel. It's helpful to lift and hold the speaker out of the way for access. Just be careful not to pull on the thin flex cable while you work.
Pry up the proximity sensor

  • Working left to right, slide an opening pick beneath the flex cable and underneath the proximity sensor + flood illuminator module.

  • Gently wiggle and lift to separate the module from its notch in the front panel.

  • It's helpful to lift and hold the speaker out of the way for access. Just be careful not to pull on the thin flex cable while you work.

撬起接近传感器

从左向右工作，在柔性电缆下方和接近传感器 + 泛光照明器模块下方滑动开口撬片。

轻轻摆动并抬起，将模块与前面板上的凹槽分开。

抬起并握住扬声器以便接入是有帮助的。工作时请注意不要拉薄的柔性电缆。

在开源创作共享许可协议下，你的投稿已被许可。